Ideal Electrical 85-332 2-Way Digital Cable Splitter, 2.4 GHz

High performance 2.4 GHz Digital Splitters are used for splitting a single coax line into 2 lines. These splitters are designed for applications that operate in the 5 MHz to 2.4 GHz range, which include: Satellite, Digital/HD Cable TV, Broadcast (over the air) TV, CCTV and other general purpose coaxial cable splitting requirements. All ports on the 2.4 GHz splitters are power pass enabled. This allows any of the ports to be used to pass power from the satellite set top box to the satellite dish or multi-switch. All splitters include an internal printed circuit board design inside of a nickel plated zinc die cast housing which helps to improve overall splitter performance in return loss, insertion loss and port-to-port isolation measurements, resulting in a stronger, cleaner signal with more protection from outside signal interference. All 2.4 GHz splitters have a solid, sealed body for improved EMI/RFI performance and a standoff design which allows cables to be routed behind the splitter for tight installations. Machine formed threads on the F ports allow for smooth connector mating. Splitters include a grounding screw port for attaching ground wires and two user accessible mounting holes.

• Use to split a signal 2 ways
• Soldered back (not glued) for improved EMI/RFI performance
• Nickel-plated housing - designed for indoor use
• Machine formed threads on the F ports allow for smooth connector mating, Pair of grounding screws eliminates the need for a grounding block
• EMI/RFI shielding effectiveness: -80dB, Insertion loss: 4.4dB to 6.4dB over rated frequency range, all ports are power-pass: 0.5 Amp DC; 60 Volt DC Max.; 12-18 Volt DC typical operation for LNB power