Clear Lens Motorcycle Led Taillights Brake Tail Light with Integrated Turn Signal Lamp Indicators For Yamaha 2008-2009-2010 Raider

Taillight integrated turn signal lens For Yamaha 2008-2009-2010 Raider Running light / position light : red color Stop light / brake light : red color more powerful when you are braking Integrated turn signals indicators : amber color on each half of the taillight (wires are independent) To slow down the blinking rate use provided resistors if necessary: Wiring Diagram applicable to most bikes: Black Wire(Negative), Green Wire(Brake) Red Wire(Running Light) 1. Connect one end of the resistor to the ground wire on your turn signal harness from your bike. 2. Connect the other end of the resistor to both the YELLOW wire from our taillight and the positive turn signal wire from your turn signal harness from your bike. 3. Repeat the same process for the other side. To use the red connectors, place one wire inside along one channel, place another wire inside along the other channel. Push down the metal pin as it will make a small cut on each wire bridging the connectors. if you are using the resistors, place one end of the resistor in the middle of either channel along with the one wire.

• Specific tail light for the above-mentioned models, Improve the look and lighting of your motorcycle
• integrated turn signal fuctions
• best quality AS material
• Brake light: Red. Turn signal: Amber